Driver Jmicron Usb To Ata/atapi Bridge

I plugged an Drive enclosure and my laptop recognizes it as a USB to ATA/ATAPI Bridge but will. This hotfix will update your usb related driver.

This is a bit odd. I had an old WD 40GB IDE HDD connected to my PC running XP Pro SP2 via an IDE/SATA to USB bridge, just plugged into a USB 2.0 port. It was working fine until I plugged in an even older Maxtor 40GB ATA HDD instead. Both devices worked fine until I re-formatted the Maxtor one using Partition Commander.

For any other receivers you can now click install automatically to install the drivers. Logitech usb dongle driver. Once the drivers finish installing then click finish.

Now, neither drive is showing up in My Computer. In device manager, it says that my IDE/SATA to USB bridge is actually a USB to ATA/ATAPI bridge and is working properly. I've tried uninstalling the driver and then just plugging the bridge in again. It then recognizes it as a ATA/ATAPI bridge again and says that my hardware is ready to use, but still no drive is showing.

Shouldn't it show up as an IDE/SATA bridge? That's what it says on the bridge itself. Is it because I plugged in an ATA drive instead of an IDE or SATA? I don't really understand the difference, I'm afraid. This has me a little puzzled.

Many thanks in advance.

Hello Emmett, Thank you for posting your query in Microsoft Community. We regret the inconvenience caused to you. We will be glad to assist you with your issue.

It would be grateful if you can reply to this question in order to assist you further. Polwizjer download google. Is the issue persists with the particular External hard drive? Did you install all pending Windows update?

I would suggest you to update the chipset drivers from the manufacture’s website and check if it helps. You can update drivers from the Device Manager.

Follow the steps to update drivers from the Device Manager: 1. Right click on Start button, select Device Manager. Find the drivers which needs to be installed and also see if there are any warning symbols. If yes update the drivers. Right click on the external hard drive device and click on Update driver. If the issue still persists, try to install drivers in Compatibility mode and check. Refer the steps: a.

Download the Drive from the manufacture’s website, Right click on the setup file and select Properties. Click the compatibility tab, tick the box next to Run this program in compatibility mode for and select Windows.

For reference: Let us know if the above information helped you. For further assistance feel free to post your queries in Microsoft forums. We will be glad to assist you. I plug in my Thermaltake BlacX N0028USU External Hard Drive SATA Enclosure Docking Station 2.5' & 3.5'. I can not access the files on the hard-drive. I go to 'my computer' and the external hard drive does not show there yet when I plug it in, my computer recognizes that it was plugged in. I'm using Windows 10 on a Dell XPS 8700.

Any ideas how to make this work? I have a similar problem with an External Hard Drive Enclosure which worked fine before the most recent updates shown below: Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140743) installed on 4th March, and Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140768) installed on 9th March. The same circumstances apply, in that the drive is not shown, but has been recognised as being plugged in and shows in Device Manager. Please advise.